Manual Corn Seeder Use Should Pay Attention To What

The main working parts of Manual Corn Seederare divided into two categories

The main working parts of Manual Corn Seederare divided into two categories: hoe shovel type and rotary type.  Among them, hoe shovel type is widely used and can be divided into three types according to their functions: weeding shovel, scarifying shovel and ridging shovel.  Today we will analyze and study the matters needing attention of the manual corn seeder for you.

  1. We need to check the engine oil of the manual corn seeder.  Add insufficient oil so that the oil level is between the upper and lower scales of the oil gauge.
    2. Check the gear oil of the transmission box of the manual corn seeder.  If the oil level is too low, add gear oil to the lower edge of the oil filling hole.
    3. Daily check the fuel oil of the engine of the manual corn seeder.  Not enough fuel specified in the instructions.
    4. Check the clutch cable.  If the tension is not correct, loosen the lock nut and adjust the cable to the appropriate position.
    5. Check the throttle cable of the manual corn seeder.  If the position of the cable is inappropriate, adjust the cable to the appropriate position through the lock nut.
    6. Check the drive belt tension.  If the tension is not appropriate, the drive belt can be adjusted to the appropriate tension by adjusting the tension wheel.
    The above description is our analysis and research on manual corn seeder. I hope it can be helpful to you. Thank you for your support and welcome to cooperate with us!  Thank you for watching.

hongxiang luu

5 Read Blog posts

Comments